Sony SNC-DF40N User Guide - Page 42
Sending Images to FTP Server - FTP client setting Menu, Common Tab - Setting the FTP Client Function
![]() |
View all Sony SNC-DF40N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Sending Images to FTP Server - FTP client setting Menu When you click FTP client on the Administrator menu, the FTP client setting menu appears. Use this menu to set up for capturing and sending still images to an FTP server. By using FTP client function, you can send the image and audio file which has been shot and recorded linked with the external sensor input or with the built-in motion detection function to FTP server. The image file can also be sent periodically. FTP client setting menu is composed of three tabs Common, Alarm sending and Periodical sending. Common Tab - Setting the FTP Client Function Password Type the password for the FTP server. Re-type password To confirm the password, type the same characters as you typed in the Password box. Passive mode Set whether you use the passive mode of FTP server or not when connecting to FTP server. Select On to connect to FTP server using the passive mode. OK/Cancel See "Buttons common to every setting menu" on page 26. Alarm sending Tab - Setting the FTP client action when detecting the alarm Set to forward the image and audio file to the specified FTP server linked with the alarm detection by the external sensor input or by the built-in motion detection function. Administrating the Camera FTP client function To activate the FTP client function, select On. The FTP client setting page appears. When you do not wish to use the FTP client function, select Off. Note The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function. FTP server name Type the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server. User name Type the user name for the FTP server. Alarm sending Select On to send the image and audio file to FTP server linked with the alarm detection. Remote path Type the path to the destination up to 64 characters. Image file name Type the file name you want to assign to the images when sending to the FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming. 42 Sending Images to FTP Server - FTP client setting Menu
![](/manual_guide/products/sony-sncdf40n-user-guide-1c508ae/42.png)