Sony SNC-DF40N User Guide - Page 48
Downloading Images from the Camera - FTP server setting Menu
![]() |
View all Sony SNC-DF40N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Downloading Images from the Camera - FTP server setting Menu When you click FTP server on the Administrator menu, the FTP server setting menu appears. Use this menu to set up for the FTP server function which finds a specified image and audio file stored in the built-in memory of the camera (about 8 MB) or download the still image file from the camera. Setting the Alarm Output - Alarm output setting Menu When you click Alarm output on the Administrator menu, the Alarm output setting menu appears. You can set in this menu to control the alarm out of I/O port on the rear of the camera linked to the alarm detection and the timer. Alarm out 1, 2 Tab Administrating the Camera FTP server function To activate the FTP server function, select On and click OK. When you do not use the FTP server function, select Off and click OK. OK/Cancel See "Buttons common to every setting menu" on page 26. Note Note the followings when log in to FTP server of the camera using the FTP client software on the computer. • The frame rate and the operativity of the monitor window in the main viewer will decline. • While recording the image using the Image memory function, you cannot delete the recording folder. • When the recorded image or audio file is deleted, the camera counts the free space of the built-in memory again when logging off. Alarm output To activate the Alarm output function, select On. The basic setting options are displayed below. When you do not use the Alarm output function, select Off. Mode Select the mode of the Alarm output function. Alarm: Controls alarm output by synchronizing with an external sensor input or the built-in activity detection function. Timer: Controls alarm output by the timer. Alarm This item is displayed when Mode is set to Alarm. Select the alarm to link the alarm output function. If the selected alarm is detected, the alarm output status changes. Sensor input: External sensor connected to sensor input of the camera I/O port Motion detection: To set the motion detection function, click Motion detection. The Motion detection setting page appears (see page 52). 48 Downloading Images from the Camera - FTP server setting Menu / Setting the Alarm Output - Alarm output setting Menu
![](/manual_guide/products/sony-sncdf40n-user-guide-1c508ae/48.png)