Sony SNC-DF40N User Guide - Page 9
When using Windows XP Service Pack 2, Installing software, Installing ActiveX Control
View all Sony SNC-DF40N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
If "Setting OK" is displayed, the IP address is correctly assigned. Example: In case of IP Setup Program If message "Internet Explorer" appears, click Yes. Preparation 12 To access the camera directly, double-click the camera name in the list. If message "File Download - Security Warning" appears, click Run. Tip The factory setting of the camera network is as follows. IP address: 192.168.0.100 Subnet mask: 255.0.0.0 The welcome page of the network camera is displayed in the Web browser. Note If you select Save in the "File Download - Security Warning" dialog, you will not be able to perform installation correctly. Delete the downloaded file, and click the Setup icon again. If message "Internet Explorer - Security Warning" appears, click Run. Note If the IP address is not set correctly, the welcome page does not appear after step 12. In this case, try to set the IP address again. When using Windows XP Service Pack 2 Installing software A warning message regarding the active contents may appear when you install software such as IP Setup Program from CD-ROM. In this case, operate as follows: The software installation starts. Installing ActiveX Control During installation of ActiveX Control, the information bar or "Security Warning" may appear. In this case, operate as follows: 9 Assigning the IP Address to the Camera