Sony STR-DA1800ES Operating Instructions (Large File - 20.62 MB) - Page 124
Channel Linear PCM only with an HDMI, Resolution Audio or Dolby TrueHD
View all Sony STR-DA1800ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
The left and right sounds are unbalanced or reversed. • Check that the speakers and equipment are connected correctly and securely. • Adjust the sound level parameters using the Speaker Settings menu. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output setting of the connected equipment is available. • Set "Audio Out" to "AMP" in the HDMI Settings menu (page 103). • You can enjoy High Bitrate Audio (DTSHD Master Audio, Dolby TrueHD), Multi Channel Linear PCM only with an HDMI connection. The surround effect cannot be obtained. • Make sure you have selected the sound field for movie or music (page 66, 67). • Sound fields do not function when DTS-HD Master Audio, DTS-HD High Resolution Audio or Dolby TrueHD with sampling frequency of more than 48 kHz are being received. Recording cannot be carried out. • Check that the equipment is connected correctly. • Select the source equipment using the input buttons (page 54). • Audio input signals via HDMI IN and DIGITAL IN jacks cannot be recorded. • Copyright protection to prevent recording is contained in the sources. In this case, you may not be able to record from the sources. A test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have short-circuit problem. • Make sure that you are not using PARTY STREAMING function (page 78). A test tone is output from a different speaker than the speaker displayed on the TV screen • The speaker pattern set up is incorrect. Make sure that the speaker connections and the speaker pattern match correctly. When the receiver is in standby mode, there is no sound output from the TV. • When the receiver enters into standby mode, sound is from the last HDMI equipment selection before you turned off the receiver. If you are enjoying other equipment, play the equipment and perform the One-Touch Play operation, or turn on the receiver to select the HDMI equipment you want to enjoy. • Make sure "Pass Through" is set to "ON" in the HDMI Settings menu if you connect equipment not compatible with the "BRAVIA" Sync to the receiver (page 103). There is a time gap between the audio output and visual display. • Check that the PARTY STREAMING function is not being used. To close a PARTY, press SHIFT, then hold down PARTY until "CLOSE PARTY" appears. For details, see page 78. 124US