Sony STR-DA1800ES Operating Instructions (Large File - 20.62 MB) - Page 46
to select START., The measurement starts in five
View all Sony STR-DA1800ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3 Press V/v repeatedly to select "Auto Cal.", then press or b. 4 Press B/b repeatedly to select "Start", then press . 5 Press to select "START". 6 The measurement starts in five seconds. The measurement process will take approximately 30 seconds with a test tone. When the measurement ends, a beep sounds and the screen switches. Note If an error code appears on the screen, see "Message list after Auto Calibration measurement" (page 48). 7 Press V/v repeatedly to select the item you want, then press . Retry: Performs the Auto Calibration again. Save: Save the measurement results and exits the setting process. Warning: Displays warning related to the measurement results. See "Message list after Auto Calibration measurement" (page 48). Exit: Exits the setting process without saving the measurement results. 8 Save the measurement result. Select "Save" in step 7. Notes • The A.P.M. (Automatic Phase Matching) function is activated after you save the measurement result. • The A.P.M. function does not work in the following cases. - The calibration type is set to "Off" when using the "Cal. Type" Auto Calibration (page 47). - When Dolby TrueHD or DTS-HD signals with a sampling frequency of more than 48 kHz are being received. 9 Press B/b repeatedly to select "Cal. Type", then press . Full Flat: Makes the measurement of frequency from each speaker flat. Engineer: Sets to "the Sony listening room standard" frequency characteristics. Front Reference: Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. 46US