Sony STR-DA1800ES Operating Instructions (Large File - 20.62 MB) - Page 94
Using a bi-amplifier connection, To exit the menu
View all Sony STR-DA1800ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Using a bi-amplifier connection If you are not using surround back speakers and front high speakers, you can connect the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals using a bi-amplifier connection. Front speaker (Right) Front speaker (Left) Hi Hi Lo Lo Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid receiver malfunction. 1 Press MENU. The menu is displayed on the TV screen. 2 Select " Settings", then press or b. The Settings menu list appears on the TV screen. 3 Select "Speaker", then press or b. 4 Select "SP Pattern", then press or b. 5 Select the appropriate speaker pattern so that there are no surround back speakers and front high speakers, then press . 6 Select "SB Assign", then press or b. 7 Select "BI-AMP", then press . The same signals output from the SPEAKERS FRONT A terminals can be output from the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals. To exit the menu Press MENU. Notes • Set the "SB Assign" to "BI-AMP" before you perform Auto Calibration. • If you set the "SB Assign" to "BI-AMP", the speaker level and distance settings of the surround back speakers and front high speakers become invalid, and those of the front speakers are used. 94US