Sony STR-DA1800ES Operating Instructions (Large File - 20.62 MB) - Page 27
To listen to the sound from the, To enjoy the TV broadcast in multi, channel surround sound from
View all Sony STR-DA1800ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connections A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable. B Optical digital cord (not supplied) C Audio cord (not supplied) D Video cord (not supplied) E Component video cord (not supplied) It is not necessary to connect all the cords. Connect cords according to the jacks of your equipment. To enjoy the TV broadcast in multi channel surround sound from the receiver * If your TV is compatible with the Audio Return Channel (ARC) function, connect A. Be sure to set the "Ctrl for HDMI" to "ON" in HDMI Settings menu (page 88). If you want to select an audio signal using other than an HDMI cable (e.g., via an optical digital cord or an audio cord), switch the audio input mode using INPUT MODE (page 91). **If your TV is not compatible with the ARC function, connect B. Be sure to turn off the TV's volume or activate the TV's muting function. Notes • Connect a TV monitor or a projector to the HDMI OUT or MONITOR OUT jack on the receiver. You may not be able to record, even if you connect recording equipment. • Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted. If this is the case, place the antenna (aerial) farther away from the receiver. • When connecting optical digital cords, insert the plugs straight until they click into place. • Do not bend or tie optical digital cords. Tips • All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. • The receiver has a video conversion function. For details, see "Function for conversion of video signals" (page 20). Recommended connection Alternative connection • When you connect the audio output jack of the TV to the TV IN jacks of the receiver to output the TV sound from the speakers connected to the receiver, set the sound output jack of the TV to "Fixed" if it can be switched between either "Fixed" or "Variable". To listen to the sound from the TV If your TV does not support System Audio Control function, set the "Audio Out" to "TV+AMP" in the HDMI Settings menu (page 103). 27US