Sony STR-DA1800ES Operating Instructions (Large File - 20.62 MB) - Page 68

If you connect a subwoofer This receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signal, which is a low-pass sound effect output from a subwoofer to a 2 channel signal. However, the low frequency signal is not generated for "NEO6 CIN" or "NEO6 MUS" when all speakers are set to "Large". In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the subwoofer's cut off frequency as high as possible. Notes on sound fields • Depending on the speaker pattern settings, some sound fields may not be available. • You cannot select PLIIx MV/MS and PLIIz at the same time. - PLIIx MV/MS is available only when the speaker pattern is set to a setting with surround back speaker(s). - PLIIz is available only when the speaker pattern is set to a setting with front high speakers. • The sound fields for music and movie do not work in the following cases. - DTS-HD Master Audio, DTS-HD High Resolution Audio or Dolby TrueHD with sampling frequency of more than 48 kHz are being received. - "A. DIRECT" is selected. • "PLII MV", "PLIIx MV", "PLII MS", "PLIIx MS", "PLIIz", "NEO6 CIN" and "NEO6 MUS" do not work when the speaker pattern is set to 2/0 or 2/0.1. • When one of the sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to "Large" in the Speaker Settings menu. However, the sound will be output from the subwoofer if - the digital input signal contains LFE signals. - the front or surround speakers are set to "Small". - "MULTI ST.", "PLII MV", "PLII MS", "PLIIx MV", "PLIIx MS", "PLIIz", "HD-D.C.S." or "P. AUDIO" is selected. To turn off the surround effect for movie/music Press SOUND FIELD +/- repeatedly to select "2CH ST." or "A.F.D. AUTO". You can also press 2CH/A.DIRECT repeatedly on the receiver to select "2CH ST." or press A.F.D. repeatedly on the receiver to select "A.F.D. AUTO". 68US