Stihl MS 311 User Manual - Page 24

Fit the E-clip 2.

Page 24 highlights

1 2 1 1 4903RA272 TG 4903RA034 TG 4903RA032 TG 4903RA037 TG : Take the brake lever (2) out of the hand guard (1). - Inspect the pivot pins and replace if necessary, b 5.5 : Push the hand guard with brake lever (1) over the machine until they are positioned against the pivot pins (arrows). : Fit the spacer sleeve (1). 1 - Inspect the cam lever and replace if necessary, b 5.4 2 Installing 4903RA035 TG 1 - Fit the strap (1). : Lift the bearing boss of the hand guard and the brake lever a little and position them over the pivot pins (arrows). : Fit the E-clip (2). 4903RA033 TG - Clean all disassembled parts, b 14 : Hold the brake lever (1) so that the brake spring attachment point (arrow) is at the top. : Push the brake lever (1) into the hand guard recess and line up the holes. 1 : Turn the cam lever (1) to one side until the cam of the hand guard (arrow) slips passed it. 4903RA036 TG - Push the hand guard bearing boss and the brake lever on to the pivot pins. MS 311, MS 391 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

23
MS 311, MS 391
:
Take the brake lever (2) out of the
hand guard (1).
Inspect the pivot pins and replace
if necessary,
b
5.5
Inspect the cam lever and
replace if necessary,
b
5.4
Installing
Clean all disassembled parts,
b
14
:
Hold the brake lever (1) so that
the brake spring attachment point
(arrow) is at the top.
:
Push the brake lever (1) into the
hand guard recess and line up
the holes.
4903RA032 TG
1
2
4903RA033 TG
1
:
Push the hand guard with brake
lever (1) over the machine until
they are positioned against the
pivot pins (arrows).
:
Lift the bearing boss of the hand
guard and the brake lever a little
and position them over the pivot
pins (arrows).
:
Turn the cam lever
(1) to one side
until the cam of the hand
guard (arrow) slips passed it.
Push the hand guard bearing
boss and the brake lever on to
the pivot pins.
4903RA034 TG
1
4903RA035 TG
4903RA036 TG
1
:
Fit the spacer sleeve (1).
Fit the strap (1).
:
Fit the E-clip (2).
4903RA272 TG
1
4903RA037 TG
1
2