Stihl MS 311 User Manual - Page 83
Installing, Intake Manifold
View all Stihl MS 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Installing 1 1 1 4903RA232 TG : Fit the fuel hose (1) in the guide (arrow). : To pull the manifold flanges through the openings in the carburetor carrier, wind pieces of string (1) (about 15 cm long) 2 around the backs of the flanges and pass the ends of the strings through the openings. 1 0001RA399 TG 12.9 Intake Manifold A damaged intake manifold can result in engine running problems. - Troubleshooting, b 3.6 or b 3.7 - Remove the shroud, b 6.4 - Remove the carburetor, b 12.5 - Remove the carburetor carrier, b 12.8 1 1 2 1 1 4903RA235 TG 4903RA234 TG : Pull the ends of the strings with the manifold flanges through the intake opening. 4903RA233 TG : Take out the sleeve (2) and ring (1). When reassembling, check that all wires are properly seated in their guides. - Reassemble all other parts in the reverse sequence. : Take out the screws (1). : Remove the intake manifold (2). - Inspect the intake manifold (2) and replace it if necessary - even very minor damage can result in engine running problems, b 3.7 - Pull the manifold flanges into the openings in the carburetor carrier with the string. - Remove the string. 82 MS 311, MS 391