Symphonic VR69WF Owner's Manual - Page 23

QUICK-FIND TIME SEARCH This function enables you to search and confirm the contents of the recorded program(s) using the index mark. The VCR begins fast forwarding by selecting this function. When the VCR find the beginning of the program(=the index mark), the VCR begins playback video tape at high speed for 30 seconds. Then, return to fast forwarding again to the beginning of next program. The VCR repeats these operation to the tape end. Concerning the index mark, please see "INDEX SEARCH" section. • Tape must be fully rewound. • You can begin the Quick-Find by pressing the QUICK-FIND button on the remote control. You can also begin the Quick-Find by the following procedure. The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip. Example: To watch a program after 2 hours and 50 minutes from the present position, in either direction. • You can choose the time search mode by pressing the TIME SEARCH button on the remote control. Then continue with step [3]. 1 Select "SEARCH SELECT" Press the MENU button until the SEARCH SELECT menu appears. SEARCH SELECT QUICK-FIND INDEX SEARCH TIME SEARCH Select "SEARCH SELECT" 2 Select "TIME SEARCH" Press the MENU button until the SEARCH SELECT menu appears. SEARCH SELECT QUICK-FIND INDEX SEARCH TIME SEARCH Press the PLAY/A or STOP/V button to point to "TIME SEARCH". Then, press the F.FWD/I0- button. W14:11,1.4 2 Select "QUICK-FIND" Confirm "QUICK-FIND" is pointed to, then press the F.FWD/10- button. The VCR begins the Quick-Find. TO SKIP TO THE BEGINNING OF NEXT PROGRAM Press the QUICK-FIND button on the remote control. TO VIEW AT NORMAL SPEED Press the PLAY button. The Quick-Find is cancelled. • A video cassette must be insert in the VCR for this function to work. • This function will not operate in the recording mode. • When you want to cancel the Quick-Find while in progress, press the STOP button. • When the end of a tape is reached during the Quick- Find, the tape will automatically rewind to the beginning. After rewinding finishes, the VCR will eject the tape and turn itself to off. 3 Enter your desired time Press the PLAY/A or STOP/V button until your desired time appears. ( "2:50" stands for 2 hours 50 minutes) TIIfIkSLIACH • The Time Search mode will be cancelled if the procedures are not activated in 30 seconds. 4 Begin Time Search By pressing the REW or F.FWD button, the VCR will rewind or fast forward to the specified point. The time counts down as the searching progresses. 5 After Time Search Playback starts automatically when 0:00 is reached. • A video cassette must be inserted in the VCR for this function to work. • Time Search can be set up to a maximum of 9 hours 59 minutes (9:59). • This function will not operate in the recording mode. • When you want to cancel the Time Search while in progress, press the STOP button. - 23 - EN 8L15