Symphonic VR69WF Owner's Manual - Page 24
Viewing, Recording, Program, Skipping, Unwanted, Scenes, During, Monitor, Progress
View all Symphonic VR69WF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
RECORDING • Please refer to the connection you are using, through pages 10, 11, or 12 on "ANTENNA/CABLE CONNECTIONS" before continuing. • Be sure to check that the POWER and the VCR/TV indicators are both on. • Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on CH3 CH4 the back of the VCR to match the channel [Back of selected on the TV. the VCR] • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) • You must select the recording mode in TV STEREO or SAP when you record a broadcast. Refer to "SELECTING THE MTS SYSTEM" on page 18. SKIPPING UNWANTED SCENES DURING RECORDING Press the PAUSE/STILL button to temporarily stop recording. Press the PAUSE/STILL or RECORD button to resume recording. NOTE: When the VCR is in the Pause mode, you may view the pause time remaining with • marks on the TV screen. Each ■ mark represents one minute. After five minutes, the VCR will automatically switch to the Stop mode to prevent tape damage. When there is 1 minute remaining, one ■ will flash. VIEWING AND RECORDING THE SAME PROGRAM RECORDING ONE PROGRAM AND VIEWING ANOTHER Select the channel to be recorded Press the number buttons on the remote control or the CHANNEL V or A button. CH 32 NOTE: If you have a cable box or satellite box connected to this VCR, please refer to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 before proceeding to the next step. 2 Select the tape speed Press the TAPE SPEED button on the VCR to select the desired tape speed (SP/SLP). You can record one program while viewing another. To start recording, follow steps [1] to [3] under "VIEWING AND RECORDING THE SAME PROGRAM". To select the channel you want to view at the TV, follow the steps below. NOTE: If you have a cable box or satellite box con- nected to this VCR, please refer to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 before proceeding to the next step. 4 Select the TV mode Press the VCR/TV button so that the VCR/TV indicator on the VCR disappears. 5 Select the channel on the TV Set the TV to the channel you want to watch. 3 Begin recording Press the RECORD button. The REC indicator on the VCR comes on. NOTE: If any menu is activated on the TV screen, the RECORD button on the remote control does not function. Press the RESET/EXIT button to clear the menu. Then, press the RECORD button. TO MONITOR THE PROGRESS OF YOUR RECORDING 1) Press the VCR/TV button so that the VCR/TV indicator on the VCR comes on. 2) Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV. CH3 CH4 CO [Back of the VCR] 4 Stop recording Press the STOP button when recording is completed. - 24 - EN 8L15