TP-Link Archer C2 Archer C2 V1 User Guide 1910010993 - Page 108
Static Route List
View all TP-Link Archer C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Archer C2 AC750 Wireless Dual Band Gigabit Router There are two submenus under the Advanced Routing menu as shown in Figure 4-87: Static Route List and System Routing Table. Click any of them, and you will be able to configure the corresponding function. 4.16.1 Static Route List Choose menu "Advanced Routing → Static Route List", and then you can configure the static route in the next screen (shown in Figure 4-88). A static route is a pre-determined path that network information must travel to reach a specific host or network. Figure 4-88 Static Route To add static route entries: 1. Click Add New shown in Figure 4-88, you will see the following screen. Figure 4-89 Add or Modify a Static Route Entry 2. Enter the following data: Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static route. Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion. Gateway - This is the IP Address of the gateway device that allows for contact between the router and the network or host. - 98 -