TP-Link Archer C2 Archer C2 V1 User Guide 1910010993 - Page 33
Network
View all TP-Link Archer C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4.4 Network Archer C2 AC750 Wireless Dual Band Gigabit Router Figure 4-2 the Network menu There are three submenus under the Network menu (shown in Figure 4-2): WAN, LAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. 4.4.1 WAN Choose menu "Network → WAN", you can configure the IP parameters of the WAN on the screen below. 1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will automatically get IP parameters from your ISP. You can see the page as follows (Figure 4-3): Figure 4-3 WAN - Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to release the IP parameters. - 23 -