TP-Link Archer C2 Archer C2 V1 User Guide 1910010993 - Page 121

Set IPv6 DNS Server manually

Get TP-Link Archer C2 PDF manuals and user guides View all TP-Link Archer C2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 121 highlights

Archer C2 AC750 Wireless Dual Band Gigabit Router Figure 4-105 PPPoEv6  PPP Username/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.  Authentication Type - Choose one authentication type from AUTO-AUTH, PAP, CHAP and MS-CHAP.  Addressing Type - There are two types of assignation for IPv6 address: SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.  MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.  Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy function if you need.  Use IP address specified by ISP - Input a static IPv6 address from the ISP.  Set IPv6 DNS Server manually - Enter the IP address of the IPv6 DNS server and secondary IPv6 DNS server. - 111 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 111 -
Figure 4-105 PPPoEv6
PPP Username/Password
- Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Authentication Type
– Choose one authentication type from
AUTO-AUTH
,
PAP
,
CHAP
and
MS-CHAP
.
Addressing Type
- There are two types of assignation for IPv6 address: SLAAC (Stateless
address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol for IPv6)
Server.
MTU(Bytes)
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP connection.
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy function if you need.
Use IP address specified by ISP
-
Input a static IPv6 address from the ISP.
Set IPv6 DNS Server manually
-
Enter the IP address of the IPv6 DNS server and
secondary IPv6 DNS server.