TP-Link Archer C2 Archer C2 V1 User Guide 1910010993 - Page 15
The Rear Panel - setup
View all TP-Link Archer C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1.4.2 The Rear Panel Archer C2 AC750 Wireless Dual Band Gigabit Router Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). WPS/Reset: Pressing this button for less than 5 seconds enables the WPS function. If your client devices, such as wireless adapters, support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection between the router and client devices and automatically configure wireless security for your wireless network. Pressing this button for more than 5 seconds enables the Reset function. With the router powered on, press and hold the WPS/Reset button (approximately 8 seconds) until all LEDs are lit. And then release the button and wait for the router to reboot to its factory default settings. Wireless On/Off: The button for the wireless function. Internet: This port is where you will connect the DSL/cable Modem, or Ethernet. Ethernet (1, 2, 3, 4): These ports (1, 2, 3, 4) connect the router to the local PC(s). - 5 -