TP-Link Archer C2 Archer C2 V1 User Guide 1910010993 - Page 27
Archer C2, Wireless Network Name, Region, Security, Enable Security WPA-PSK/WPA2-PSK, Disable
View all TP-Link Archer C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Archer C2 AC750 Wireless Dual Band Gigabit Router Figure 3-13 Quick Setup - Wireless 2.4GHz Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of up to 32 characters. The same name must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_2.4GHz_XXXXXX. This value is case-sensitive. For example, TEST is NOT the same as test. Region - Select your region from the drop-down list. This field specifies the region where the wireless function of the router can be used. It may be illegal to use the wireless function of the router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. Note: Limited by local law regulations, version for North America does not have region selection option. Security Enable Security (WPA-PSK/WPA2-PSK) - It's selected by default, with the default PSK password the same as the default PIN code. Disable Wireless Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the router without encryption. The above settings are only for basic wireless parameters. For advanced settings, please check "More Advanced Wireless Settings", and then you can set the following parameters. - 17 -