TRENDnet TEW-740APBO Users Guide - Page 29
Create Virtual AP (VAP), Virtual AP Overview, Wireless -> Virtual AP Setup
![]() |
View all TRENDnet TEW-740APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
TRENDnet User's Guide Create Virtual AP (VAP) The access point supports broadcasting multiple SSIDs, allowing the creation of Virtual Access Points, partitioning a single physical access point into 7 logical access points, each of which can have a different set of security, VLAN Tag(ID) and network settings. Figure 3-2 shows multiple SSIDs with different security type and VLAN settings. Multiple SSIDs with different Security Type and VLAN Tag Sales Network VLAN #1 Engineer Network VLAN #2 Market Network VLAN #3 Guest Network VLAN #4 Accounting Network VLAN #5 SSID 1 WEP SSID 2 WPA-PSK/TKIP WPA-PSK/AES SSID 3 WPA2-PSK/TKIP WPA2-PSK/AES SSID 4 SSID 5 TEW-740APBO Virtual AP Overview The administrator can view all of the Virtual AP's settings via this page. Please click on Wireless -> Virtual AP Setup and the Virtual AP Overview Page appears. VAP: Indicate the system's Virtual AP. MAC Address: The MAC address of the VAP Interface is displayed here. When you enable AP and reboot system, the MAC address will display here. ESSID: Indicate the ESSID of the respective Virtual AP Status: Indicate the Status of the respective Virtual AP. The Primary AP always on. Security Type: Indicate a used security type of the respective Virtual AP. MAC Filter: Indicate a used MAC filter of the respective Virtual AP. Edit: Click Edit button to configure Virtual AP's settings, including security type and MAC Filter. © Copyright 2016 TRENDnet. All Rights Reserved. 29
![](/manual_guide/products/trendnet-tew740apbo-user-s-guide-fe5b056/29.png)