TRENDnet TEW-740APBO Users Guide - Page 31
Master Key Update Period, Accounting RADIUS Server
View all TRENDnet TEW-740APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TRENDnet User's Guide o Master Key Update Period: By default, it is 83499 seconds. This time interval for rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the timelength is required. o Pre-shared Key: Enter the pre-shared key; the format shall go with the selected key type. WPA-Enterprise (or WPA2-Enterprise): The RADIUS authentication and encryption will be both enabled if this is selected. TEW-740APBO Radius Server Settings : o IP Address: Enter the IP address of the Authentication RADIUS server. o Port: By default, it's 1812. The port number used to communicate with RADIUS server. o Shared secret: A secret key used between system and RADIUS server. Supports 8 to 64 characters. o Accounting RADIUS Server: Enable to set Account RADIUS server. WEP 802.1X: When WEP 802.1x Authentication is enabled, please refer to the following Dynamic WEP and RADIUS settings to complete configuration. WPA General Settings: o Cipher Suite: By default, it is AES. Select either AES or TKIP cipher suites o Group Key Update Period: By default, it's 3600 seconds. This time interval for rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the timelength is required. o Master Key Update Period: By default, it is 83499 seconds. This time interval for rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the timelength is required. o EAP Reauth Period: By default, it's 3600 seconds. Set WPA2 PMKID cache timeout period, after time out, the cached key will be deleted. o Pre-Authentication: By default, it's "Disable". To Enable is use to speed up roaming before pre-authenticating IEEE 802.1X/EAP part of the full RSN authentication and key handshake before actually associating with a new AP. © Copyright 2016 TRENDnet. All Rights Reserved. Radius Server Settings: o IP Address: Enter the IP address of the Authentication RADIUS server. o Port: By default, it's 1812. The port number used to communicate with RADIUS server. o Shared secret: A secret key used between system and RADIUS server. Supports 8 to 64 characters. o Accounting RADIUS Server: Enable to set Account RADIUS server. Click Save button to save your changes. Click Reboot button to activate your changes 31