TRENDnet TEW-740APBO Users Guide - Page 60

TRENDnet User's Guide  Bridge table information: Select "Bridge Table information" on the drop-down list to display bridge table. Bridge table will show Bridge ID and STP's Status on the each Ethernet bridge and its attached interfaces, the Bridge Port should be attached to some interfaces (e.g. eth2, ra0~ra6 and wds0~wds3).  Bridge MAC information: Select "Bridge MACs Information" on the drop-down list to display MAC table. TEW-740APBO Event Log The Event log displays system events when system is up and running. Also, it becomes very useful as a troubleshooting tool when issues are experienced in system.  Time: The date and time when the event occurred.  Facility: It helps users to identify source of events such "System" or "User"  Severity: Severity level that a specific event is associated such as "info", "error", "warning", etc.  Message: Description of the event. Click Refresh button to renew the log, or click Clear button to clear all the record. Associated Client List List of all clients associated to the access point. This table displays local MAC addresses associated with wired or wireless interfaces, but also remember non-local MAC addresses learned from wired or wireless interfaces. Ageing timers will be reset when existing MAC addresses in table are learned again or added when new MAC addresses are seen from wired or wireless interfaces as well. When time runs out for a particular entry, it will be pruned from the table. In that situation, switching packet to that particular MAC address will be dropped. o MAC Address: Display MAC address of WDS peer. o RSSI: Indicate the signal strength of the respective WDS links. o TX/RX SEQ: Transmit and receive sequence. o TX/RX Bytes: Transmit and receive bytes © Copyright 2016 TRENDnet. All Rights Reserved. 60