Toshiba 40S51U Owners Manual - Page 57

Chapter 8: Advanced features Manual Setup 1無 > Settings > PREFERENCES > Network Setup > . 2無 Press p or q to select Wireless Setup. Press . 3無 Press p or q to select Manual Setup. Press . 4無 Press p or q to select Network Name. Press . The Software Keyboard window appears. 5無 Input the Network Name using the Software Keyboard ( page 59). To save your settings, press the BLUE button. 6無 Press p or q to highlight Authentication. Press t or u to select Open/Shared, WPA-PSK, or WPA2PSK. 7無 Press p or q to highlight Encryption. Press t or u to select None, WEP, TKIP, or AES. Note: • Certain encryption types are only compatible with specific authentication types. −−When Authentication is Open/Shared, only WEP or None are compatible. −−When Authentication is WPA-PSK or WPA2PSK, only TKIP or AES are compatible. • When incompatible Authentication/Encryption pairings are attempted, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved. 8無 Press p or q to select Security Key. Press . The Software Keyboard window appears. 9無 Input the Security Key using the Software Keyboard ( page 59). To save your settings, press the BLUE button. Note: This item is grayed out when Encryption is None. 10Select Done. Press . Note: When Encryption is None, a message will appear. Press t or u to select Yes. Press . Note: Settings are not saved if before Done is selected. is pressed Wireless Information The settings configured in Wireless Setup can be confirmed. 1無 > Network > Wireless Information > . 2無 When the AP connection succeeds, a Wireless Information screen will appear. Note: Press the RED button to check the availability of surrounding APs. Note: This feature is available from the Quick menu while using Media Player or NET TV feature. > Wireless Information > . Item Status Description Connected is displayed when the TV is connected to the AP. Disconnected is displayed when the TV is disconnected from the AP. Signal Speed Mode Connection signal strength with the AP (STRONG/MEDIUM/WEAK) The link speed with the AP Working mode (11a, 11b, 11g, 11n) Channel The channel in use (1-165) Network Name SSID set Authentication Authentication set Encryption Encryption set Security Key Security Key set AP MAC Address TV MAC Address DHCP IP Address Subnet Mask Default Gateway The AP's MAC address is displayed when the TV is connected to the AP. The TV's MAC address Enabled is displayed when you use DHCP. Disabled is displayed when you do not use DHCP. The TV's IP address Value of the Subnet Mask Default GATEWAY's address DNS DNS's address Note: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. We recommend that the Encryption setting be changed to AES (Under manual setup). 57