Toshiba NB305-N411BL User Manual - Page 96
Installing a memory module, Turn the computer upside down and remove the battery pack - refer
View all Toshiba NB305-N411BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Optional Devices ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Standby or Hibernation Mode. c. Wake-up on LAN is enabled. d. The wireless communication is enabled. e. USB Sleep and Charge function is enabled. ■ Be careful not to let screws or other foreign matter fall into the computer. It could cause malfunction or electric shock. ■ Additional memory module is a precision electronic component that may be fatally damaged by static electricity. Since the human body can carry static electricity, it is important that you discharge yourself before touching or installing any additional memory modules. To discharge your body's static electricity, simply touch any metal close to you with bare hands. ■ Turn off the power and disconnect the AC adaptor when installing or replacing a memory module. ■ If you use the computer for an extended period of time, the memory modules and the circuits located close to the memory modules will become hot. Allow then to cool to room temperature before you replace them. Installing a memory module To install a memory module: 1. Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 3, Getting Started if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. 3. Turn the computer upside down and remove the battery pack - refer to Replacing the battery pack section in Chapter 6, Power and Power-up Modes, if required. 4. Loosen the screw securing the memory module cover. User's Manual 8-4