Toshiba Portege M200-S838 User Guide - Page 150
Using the Ethernet LAN Port
View all Toshiba Portege M200-S838 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
150 Exploring Your Computer's Features Setting up for communications 5 To verify that the modem is set up properly, double-click the COM port to which your modem is connected. The Toshiba Software Modem Properties box appears. In the device status area, the computer should indicate whether the modem is working properly. 6 If the modem is not working properly, click Troubleshooting and follow the instructions. 7 Click OK to close the Properties box, then the Phone and Modem options box. 8 Close the Control Panel. Using the Ethernet LAN Port If your operating system is Windows® XP Tablet PC Edition, you can connect your computer to a Local Area Network (LAN) at work or from a remote location. When your computer starts, the Windows® operating system attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply. To avoid this delay, you can configure the Windows® operating system to disable the LAN port. To disable the LAN port: 1 Click Start and then click Control Panel. 2 Click Performance and Maintenance. 3 Click the System icon and select the Hardware tab, then select the Device Manager button 4 Select Network Adapters, then select the specific Network Adapter. 5 Right-click the Adapter and click Disable. 6 Click Yes to confirm disabling the network card. Your LAN port is now disabled.