Toshiba Portege S100 PPS10C-LS101E Users Manual Canada; English - Page 136
HDD, Ultra Slim Bay HDD, CD-ROM, FDD or SD memory card, Network LAN boot.
View all Toshiba Portege S100 PPS10C-LS101E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
HW Setup To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. 2. The following menu will be displayed with the following icons: Built-in HDD, Ultra Slim Bay HDD, CD-ROM, FDD (or SD memory card), Network (LAN) boot. A bar will appear only under the selected device. 3. Use the left/right cursor keys to highlight the boot device you want and press Enter. ■ If a supervisor password is set only, it is the following. ■ The menu above appear when you use the user password to start the computer (able to run HW Setup). ■ The menu above does not appear when you use the user password to start the computer (unable to run HW Setup). ■ If the supervisor and user password are set, it is the following. ■ The menu above appear when you use the supervisor and user password to start the computer (able to run HW Setup). ■ The menu above does not appear when you use the user password to start the computer (unable to run HW Setup). ■ The menu above appear when you use the supervisor password to start the computer (unable to run HW Setup). ■ The selection method above does not change the boot priority settings in HW Setup. ■ If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup. 7-4 User's Manual