Toshiba Portege S100 PPS10C-LS101E Users Manual Canada; English - Page 72

Getting Started Create Optical Recovery Discs A recovery image of your computer is stored on the hard disk. You may use this image to create CD or DVD recovery discs using the following steps: 1. Select either blank CDs or DVD media. 2. The application will allow you to choose a type of media to create recovery CDs/DVD including: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R and DVD+RW. Some media may not be compatible with the optical media drive of your computer. Please verify your optical media drive supports the blank media you choose. 3. Turn on your computer without a PC card storage device such as HDD to open Windows XP. 4. Insert the (first) blank media into the tray of the optical media drive. 5. Double click the Recovery Disc Creator Launcher icon on the Windows XP desktop, or Select the application from start Menu. 6. After Recovery Disc Creator starts, select the type of media and the title you wish to copy to the media then click the Burn button. If your optical media drive can only write to CDs, select "CD" as the "Type" on Recovery Disc Creator. If your optical media drive of your computer can write to either CD or DVDs, select the one you are using as the "Type" on Recovery Disc Creator. Restoring the preinstalled software from the Recovery HDD About 2GB of hard disk space is reserved for recovery partition. When re-setting up your hard disk, do not change, delete or add partitions in a manner other than specified in the manual. Otherwise, space for software may be destroyed. In addition, if you use a third-party partitioning program to reconfigure partitions on your hard disk, it may become impossible to re-setup your computer. When sound mute is turned ON by the Fn + Esc key, turn OFF before starting restore. Refer to Chapter 5, The Keyboard, for details. 1. Turn off your computer. 2. While holding down 0 (zero) key on the keyboard, turn on your computer. 3. A menu appears. Press the "1" key on the keyboard to restore the original configuration as purchased. Press the "2" key to keep your current partitions intact and restore. Press the "3" key to specify partitions and restore. 4. Follow the on-screen instructions. 3-12 User's Manual