Yamaha CS6R Owner's Manual - Page 161

Sequence Play Mode Sequence Play Mode In this Mode, you can play back the built-in demo songs and Song files stored on Memory Card. Up to 100 Song files can be played back end-to-end by using the Chain Step feature. This Chain Step data can also be saved to Memory Card. A Memory Card containing Song files must already be slotted in the Card Slot. Basic details about the sequencer are given on Page 31. When you enter Sequence Play Mode, you will see the 1st screen (Demo Song). The following two screens are available. 1st screen: SEQ Demo (Sequence Demo) 2nd screen: SEQ (Sequence Chain) If you load Sequence Chain data in Card Mode (Page 174) or using the Auto Loading feature (Page 172), the 2nd screen will be displayed first. Details about how to enter Sequence Play Mode are given on Page 22. The Demo Songs contain preset tempos by default. When you switch to another Demo Song, its preset tempo will be used. You can change the playback tempo. To restore the default tempo, select "***" as the tempo setting. 3Press the [PLAY/STOP] key to play back the selected Demo Song from the beginning. 4Press the [PLAY/STOP] key again to stop the Demo Song playback. If you press the [PLAY/STOP] key once again, playback will resume from the current position. Demo Songs will playback continuously until stopped. SEQ (Sequence Chain) You can set up to 100 Steps in a Chain here. Each Chain Step is assigned a Song file and a Performance (Voices for each Part used in the Song). You can play back one particular Chain Step or multiple Chain Steps end-to-end. SEQ Demo (Sequence Demo) The Demo Song data is contained in internal memory. When you attempt to enter the SEQ Demo (Sequence Demo) screen, you will have an alert screen shown below, since you lose your data for System, internal Voices and Phrase Clip by loading the demo song. SEQ Demo)> System,IntVoice will be changed. Press the [YES] key to accept the alert and proceed to the SEQ Demo screen. You can play the demo song in this screen. Chain Step Number 1~100 Song File Sequence Track 1 2 3 MIDI CH 1 2 3 Performance MIDI CH Part 1 1 2 2 16 3 16 16 5 16 3 Plug-in Part 1 4 Plug-in Part 2 10 Phrase Clip Part 6 A/D Input Part Demo Song Name SEQ Demo) Song:[DEMOSONG] ≥ 001 ⁄= 120 Demo Song Number Playback tempo Chain settings can be saved to Memory Card. Song File Name SEQ) File:[ ] Perf Chain00 001 ⁄= 120 Meas=001 INT:128 s Playback Tempo t Settings: *** (default tempo), 25 ~ 300 1Use Knob [B] and the [ENTER] key to select the Demo Song Number. 2Set the tempo (if necessary). Chain Step Number Playback tempo Measure Performance Bank/Number s Chain Step Number Change each Chain Step. If you choose a Step Number here, the screen for the selected Chain Step will be displayed. t Settings: 00 ~ 99 You can jump to the next Chain Step screen and change the Chain settings in advance, even while a Song is being played back. A "ë" indicator is displayed to the right of the Chain Step Number at the Chain Step screen of the Song file currently being played back. 161