Yamaha PSR-8000 Owner's Manual - Page 104

,,QQ,,QQ,,QQSongP,,QQlaybac,,QQk ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ mode or a GM/XG song is being played, individual parameters for all 16 tracks will be available: TR1 through TR16 (track groups TR1-TR8 and TR9-TR16 will be selected in sequence when the [FADER] button is pressed). If aYamaha DOC song is being played use the RHY, BASS, ORCH., LEFT, and RIGHT part LCD dials to set the volume of the corresponding tracks. If a PianoSoft type song file is being played use the ORCH, LEFT, and RIGHT part LCD dials to set the volume of the corresponding tracks. When the SWITCH display is selected the FADER button alternately selects the standard PART SWITCH controls found in the normal PLAY mode (page 22), and independent SOLO/ PLAY/MUTE switches for each of the available tracks. Muted tracks or groups of tracks do not play. If a track or group of tracks is set to SOLO only that track or group will play. The track indicators above the track volume or mute/solo parameters indicate which parts correspond to which tracks, and which tracks contain data and which are muted, as shown below. No data Play track Muted track • When a GM/XG song or a song with the "/" symbol in the SONG SELECT display is played, all tracks appear on the display as if they contain data, even if they don't. s FULL ...When the FULL MIXING CONSOLE VOLUME/PAN/ EQ, FILTER, or EFFECT DEPTH display is selected, the [FULL] button will select the normal parts display, song track TR1-TR8, and song tracks TR9-TR16 in sequence. When a song track display is selected "---" will appear in place of a value for parameters which are not available. 104