Yamaha PSR-8000 Owner's Manual - Page 153

First SIMM, Remove the six screws from the SIMM cover in the center - oriental

Get Yamaha PSR-8000 PDF manuals and user guides View all Yamaha PSR-8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 153 highlights

,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,QIns,Qtalling ,QOptions,Q 2 3 -1 • SIMM cutout • Slot key • Do not install the SIMM backwards. X Remove the six screws from the SIMM cover in the center of the instrument's bottom panel, and remove the cover. Do not remove the circuit board in front of the SIMM slot (the system memory is on this board). CInsert the SIMMs in the SIMM slots as described below. WARNING Install the SIMM modules carefully as per the procedure outlined below (steps 3-1 through 3-3). Improper installation can cause shorts which may result in irreparable damage and pose a fire hazard. Carefully remove dust and dirt. Make sure that there is no dust or dirt on or around the SIMM edge terminals or the connector slots before installation. First SIMM C-1 Make sure the orientation is correct. Make sure that the cutout on the SIMM module is aligned with the protruding "key" on the connector slot. 153

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
153
Installing Options
C
Insert the SIMMs in the SIMM slots as described below.
First SIMM
C
-1
Make sure the orientation is correct.
Make sure that the cutout on the SIMM module is
aligned with the protruding “key” on the connector
slot.
WARNING
Install the SIMM modules carefully as per the procedure
outlined below (steps 3-1 through 3-3). Improper installation
can cause shorts which may result in irreparable damage
and pose a fire hazard.
Carefully remove dust and dirt.
Make sure that there is no dust or dirt on or around the
SIMM edge terminals or the connector slots before installa-
tion.
2
3
-1
•
Do not install the SIMM backwards.
•
Slot key
•
SIMM cutout
Do not remove the circuit board in front of the SIMM slot
(the system memory is on this board).
X
Remove the six screws from the SIMM cover in the center
of the instrument’s bottom panel, and remove the cover.