Yamaha PSR-8000 Owner's Manual - Page 134
System
View all Yamaha PSR-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
,,QQ,,QQ,,QQThePS,,QQR-8000,,QQ"Func,,QQtions",,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ s SYSTEM ...q LOCAL CONTROL The LOCAL CONTROL parameters determine whether or not the corresponding PSR-8000 parts/voices are controlled via the PSR-8000 keyboard, sequence data, or accompaniment playback. When local control is on, the PSR-8000 keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard or internal data. Local control can be turned off, however, so that the PSR-8000 does not play the specified voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. This means that while an external sequencer or MIDI computer, for example, plays the PSR-8000's voices, an external tone generator can be played from the PSR-8000. Use the SONG, ACMP, M.PAD, LEFT, R1, R2, and LEAD LCD dials to turn local control of the corresponding items ON or OFF. A check mark appears in the appropriate LOCAL CONTROL box in the upper part of the display when local control of the corresponding part/voice is turned on. q CLOCK & RECEIVE TRANSPOSE CLOCK Determines whether the PSR-8000 is controlled by its own internal clock or a MIDI clock signal received from an external device. INTERNAL is the normal CLOCK setting when the PSR-8000 is being used alone. If you are using the PSR-8000 with an external sequencer, MIDI computer, or other MIDI device, and you want the PSR-8000 to be synchronized to the external device, set this function to EXTERNAL. In the latter case, the external device must be connected to the PSR-8000 MIDI IN connector, and must be transmitting an appropriate MIDI clock signal. TRANSMIT CLOCK Turns MIDI clock transmission ON or OFF. When OFF, no MIDI clock or START/STOP data is transmitted. Use the TRANSMIT CLOCK dials to turn ON or OFF as required. RECEIVE TRANSPOSE When the RECEIVE TRANSPOSE parameter is turned OFF note data received by the PSR8000 is not transposed, and when set to ON the received note data is transposed according to the current PSR-8000 transpose setting. 134