Yamaha PSR-8000 Owner's Manual - Page 54

,,QQ,,QQ,,QQCustom,,QQVoice,,QQCreato,,QQr ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ s CLEAR CUSTOM VOICE Clears unwanted custom voices from memory, making more memory available for custom voice storage. Use the CLEAR LCD dials to select the custom voice you want to clear. Press the EXECUTE button, then press YES to clear the voice when the confirmation display appears (or NO to cancel). • The custom voice currently being edited cannot be cleared. The Full Edit Parameters The FULL EDIT mode can be entered as described on page 51. The following display pages are available: VOICE 55 E1: WAVEFORM 56 E2: EG 57 E3: FILTER 59 E4: LFO 59 VOICE SET 60 STORE/CLEAR 61 Use the and LCD buttons to the right of the display to select the desired display page. Use the v and w buttons to the left of the display to select the various parameters within each page. The COMPARE LCD button can be used during editing to compare the sound of the original voice with the edited voice. s ELEMENT SELECTION (not available for the Drum Kits PSR-8000 voice can have up to four "elements". An element is a "layer" of sound which can have an independent waveform, envelope generator settings, and other parameters. When editing in the E1:WAVEFORM, E2:EG, E3:FILTER, or E4:LFO pages you can select the element to be edited, set the maximum number of elements to be used by the voice, and mute individual elements via the ELEMENT page accessed by the upper right LCD button (" "). In the ELEMENT page the MAX NUMBER parameters sets the maximum number of elements to be used by the voice, the EDIT parameter sets the element to be edited when you return to the editing pages, and the MUTE parameters individually turn the corresponding elements ON or OFF. The circular indicators next to the element numbers in the upper section of the display indicate the mute status for each element. Press the RETURN LCD button to return to the editing pages. 54