Yamaha PSR-8000 Owner's Manual - Page 46

,,QQ,,,QQQ,,QQ,,Q,QQ,,QQRe,,Q,QQg,,QQis,,Q,QQtr,,QQat,,Q,QQio,,QQn,,Q,QQM,,QQe,,Q,QQm,,QQo,,Q,QQr,,QQy ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ,,QQ,,Q,QQ In a sophisticated instrument with as many controls and functions as the PSR8000, the Registration Memory is a vital feature. It can be used to memorize 128 complete control-panel setups (16 banks, 8 setups each) that you can recall whenever needed simply by pressing a single button. • Registration data can be saved to and loaded from floppy disk as required (pages 140, 141). • See page 171 for a complete listing of the data stored by the Registration Memory. Registering the Panel Settings To register a panel setup first make the desired control settings, then press one of the REGISTRATION MEMORY buttons ([1] ... [8]) while holding the [MEMORY] button. FREEZE REGIST BANK 1~16 1 2 3 4 5 6 7 8 REGISTRATION MEMORY MEMORY If you want to select a different registration bank prior to registering a setup, use the REGIST BANK 1-16 [-] or [+] button to select the desired memory bank - the bank number is shown next to REG. BANK in the upper right corner of the display. When a setup is registered, the current bank, registration number and name for that setup will appear in the upper left corner of the display. You can enter original names for each registration setup via the F4: REGISTRATION NAME function display described on page 127. • Any previous data in the specified registration memory will be erased and replaced by the registered panel settings. 46 FREEZE REGIST BANK 1~16 • You can jump directly to the F4: REGISTRATION NAME function display by pressing a REGISTRATION MEMORY button ([1] ... [8]) while holding the [DIRECT ACCESS] button.