Yamaha PSR-8000 Owner's Manual - Page 136
Receive
View all Yamaha PSR-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
,,QQ,,QQ,,QQThePS,,QQR-8000,,QQ"Func,,QQtions",,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ q NOTE, CONTROL CHANGE, PROGRAM CHANGE, PITCH BEND, & AFTER TOUCH SWITCH These "switches" turn transmission of the specified data type on or off. Use the NOTE, CNTCNG, PRGCNG, PITCHBND, and AFTERTCH LCD dials to turn transmission of the corresponding data on or off. A check mark appears in the appropriate box when the corresponding switch is turned on. • "-" appears for parts for which the switches cannot be turned ON. • The PSR-8000 TRANSPOSE and OCTAVE settings do not apply to note data transmitted from the UPPER and LOWER parts. • When UPPER is selected, a program change number is transmitted when the REGISTRATION MEMORY is switched. • No note data will be transmitted if the panel [LEAD], [RIGHT1], [RIGHT 2], or [LEFT] PART ON/OFF button is turned off even if it is assigned to a channel. • For the LOWER part, note data (keyboard-played note only) will be transmitted only when AUTO ACCOMPANIMENT is turned on. NOTE CNTCNG (Control Change) PRGCNG (Program Change) PITCHBND (Pitch Bend) AFTERTCH (After-touch) This switch turns transmission of the note data on or off. When off, no notes will be produced by an external instrument or tone generator even when the voice or part assigned to the selected channel is played. Note transmission can be turned off, for example, you only want the external device to respond to program change numbers, changing the selected voice without actually playing it. Turns transmission of control change data on or off. Control change data includes modulation wheel, foot controller, and any other controller data (except the pitch bend wheel, which has its own switch, below). Turns transmission of program change data on or off. Program change data corresponds to voice or "patch" numbers, and is used to select the corresponding voices on an external MIDI device. Turns transmission of pitch bend wheel data on or off. Turns transmission of keyboard aftertouch data on or off. s RECEIVE ...This display page allows you to specify the MIDI receive mode for each PSR-8000 MIDI channels, and to specify which types of data will be received via each channel. q RECEIVE MONITOR The Rx MONITOR at the top of the display indicates when data is being received on any of the 16 MIDI channels: The dots corresponding to each channel (1 ... 16) flash briefly whenever any data is received on the channel(s). q CHANNEL Use either the v and w LCD buttons to the left of the display, or the CH LCD dial to select the channel to which you want to assign a mode or change a data switch setting. The channel numbers are shown in the leftmost column in the display. q MODE The MODE LCD dials select the receive mode for the currently selected channel. Any of the following modes can be selected: • Only "XG/GM" and "OFF" can be selected for channel 10. 136