Yamaha RXV765 Owner's Manual - Page 27

INTRODUCTION PREPARATION Optimizing the speaker setting for your listening room (YPAO) When an error message is displayed during measurement Press kCursor n once, and select "Retry" or "Exit" using kCursor l / h and then press kENTER. ERROR . E-9:USER CANCEL Don't operate any function >Retry Exit [p ]/[[]:Select [ENTER]:Return Retry Performs the automatic setup procedure again. Exit Terminates the measurement and the automatic setup procedure. y • See page 74 for details on error messages. • When "E-5:NOISY" appears, you can continue measurement. To continue measurement, select "Proceed." However, we recommend that you solve the problem first and then perform measurement again. When a warning message is displayed after measurement If a problem occurs during measurement, "WARNING" is displayed on the result display screen. Check the error and solve the problems. WARNING W-1:OUT OF PHASE Reverse channel FL --- CENTER --- --- SL --- SBL --- [p]/[[]:Select [ENTER]:Return y • See page 75 for details on warning messages. • Optimization will not be performed while a warning message is displayed. We recommend that you solve the problem and perform the automatic setup procedure again. 1 If "→" is displayed on the left of "WARNING" on the result display screen, press kENTER. Details of the warning message are displayed. If there are multiple warning messages, you can display the next message using kCursor h. 2 To return to the top result display, press kENTER again. BASIC OPERATION ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 23 En