Yamaha RXV765 Owner's Manual - Page 36

FM/AM tuning Status 01:FM 87.5 MHz Preset number Frequency During the automatic station preset, the upper area of the screen changes as follows: SEARCH → MEMORY each time a station is registered. When registration is complete, "FINISH" appears and the OPTION menu screen automatically reappears. When you press rOPTION on the remote control, the screen returns to the original state. Registering stations by manual station preset You can manually register AM stations or FM stations with weak signals. 1 Tune into a station referring to "Tuning into the desired FM/AM station (Frequency tuning mode)" (see page 31). 2 Press GMEMORY (or fMEMORY). "Manual Preset" appears on the front panel display, followed soon by the preset number to which the station will be registered. y • By pressing down GMEMORY (or fMEMORY) for more than 2 seconds, you can skip step 3 and register the station to the lowest empty preset number or a preset number one higher than the last preset number. 3 Press HPRESET l / h (or fPRESET k / n) to select the preset number to which the station will be registered. When you select a preset number to which no station is registered, "Empty" appears on the display. When you select a registered preset number, a registered frequency is displayed on the right of the preset number. Frequency to be registered 01:Empty Preset number Flashing Empty (or frequency that is currently registered to the preset number) y • You can select a preset number using the mNumeric keys. 4 Press GMEMORY (or fMEMORY) again to register. When registration is complete, the screen returns to the original state. y • To cancel registration, press kRETURN on the remote control or leave the tuner without any operations for about 30 seconds. Calling a preset station (Preset tuning) You can call preset stations registered by automatic station preset or manual station preset. Press HPRESET l / h (or fPRESET k / n) to select a preset number. y • Preset numbers to which no stations are registered will be skipped. • If no stations are registered, "No Presets" or "No Presets in Memory" appears on the display. See page 31 and register stations. • You can directly select a preset number by pressing a mNumeric keys while calling a preset station. "Empty" appears on the display if you enter a preset number to which no station is registered. "Wrong Num." appears if you enter an invalid number. • When you press mNumeric keys during normal tuning, a preset number is selected. Set tuning mode to preset tuning mode using HPRESET l / h (or fPRESET k / n) prior to the operation. Clearing the preset station 1 Rotate the RINPUT selector (or press eTUNER) to switch the input source to "TUNER." 2 Press rOPTION on the remote control. The OPTION menu screen for setting options of tuner input appears on the front panel display. 3 Display "Clear Preset" using the kCursor k / n and press kENTER. The following screen appears on the display. 01:FM 92.5 MHz Preset number of the registered station you want to clear. y • You can cancel the operation and return to the OPTION menu screen by pressing kRETURN on the remote control. 4 Select the preset number of the registered station you want to clear using the kCursor k / n and press kENTER. The preset station registered to the selected preset number is cleared. To clear the registration of multiple preset numbers, repeat the above steps. To end the operation, press rOPTION. 32 En