Yamaha RXV765 Owner's Manual - Page 62

Changing various settings of this unit (SETUP menu) ■ Aspect Choices: Thrgh*/16:9/Smart Set a horizontal to vertical ratio (aspect ratio) of images reproduced by HDMI signals output from the HDMI OUT jack when the HDMI signals are converted from analog video input signals by a video conversion function. Thrgh 16:9 Smart Outputs the video signals without changing the aspect ratio. Outputs the video signals that displays 4:3 images on a 16:9 monitor with black bands on the right and left sides of the monitor screen. Outputs the video signals that displays 4:3 images on a 16:9 monitor by stretching right and left of images to fit on the monitor screen. Notes • You cannot change the aspect ratio of the screen when "Resolution" is set to "Through." • The setting is not effective for inputs with the aspect ratio other than 4:3. • You cannot obtain an effect of the aspect ratio when video signals are input from the HDMI 1-4 jacks or 720p, 1080i or 1080p signals are input. 2 Display You can change some parameters for a monitor or the front panel display. ■ Dimmer Adjustable range: -4 to 0* Sets brightness of the front panel display. As the value is lowered, the brightness of the front panel display is darkened. Note • The brightness of display does not become bright in Pure Direct mode even if the value is increased. ■ FL Scroll Choices: Continue*/Once Selects the way to scroll the screen when a total number of characters exceed a display area of the front panel display. Continue Once Repeatedly displays all characters by scrolling. Displays all characters by scrolling once, halts scrolling, and then displays first 14 characters. ■ OSD Shift Adjustable range: -5 to 0* to +5 Adjusts top and bottom positions of the OSD (on-screen display) menus. To move up the screen, set this value larger. To move down the screen, set it smaller. 3 Volume You can change some parameters for volumes. ■ Adaptive DRC Choices: Auto/Off* Adjusts the dynamic range in conjunction with the volume level. This function is useful when you are listening at lower volumes or at night. When this function is enabled, the dynamic range is adjusted as follows. If the volume setting is low: the dynamic range is narrow If the volume setting is high: the dynamic range is wide Output level Output level Auto Off Input level Volume: low Auto Off Input level Volume: high Auto Off Adjusts the dynamic range automatically. Does not adjust the dynamic range automatically. y • The "Adaptive DRC" setting is effective for headphones. ■ Max Volume Adjustable range: -30.0dB to +15.0dB/+16.5dB* (5.0 dB steps) Sets the maximum volume level so that the volume will not be accidentally increased. For example, you can adjust the volume between -80.0 dB and -5.0 dB or mute when you set this parameter to "-5.0dB." The volume increases to the maximum level when this parameter is set to +16.5 dB (default). ■ Init. Volume Choices: Off*/Mute/-80.0dB to +16.5dB (0.5 dB steps) Sets the volume at the time this unit is turned on. When this parameter is set to "Off," the volume is set to a level that last time this unit is set to standby. Note • If the setting of "Max Volume" is lower than the setting of "Init. Volume," the setting of "Max Volume" becomes effective. For example, when you set "Max Volume" to "-30.0dB" and "Init. Volume" to "0.0dB," the volume is automatically set to "-30.0dB" at the next time this unit is turned on. 58 En