Yamaha RXV765 Owner's Manual - Page 53

INTRODUCTION PREPARATION BASIC OPERATION Editing surround decoders/sound field programs Setting sound field parameters Although the sound field programs would satisfy you as they are with the default parameters, you can arrange sound effect or decoders suitable for acoustical conditions of sources or rooms by setting the parameters (sound field elements). y • You can protect the sound field against the changes of parameters the sound filed parameters when "Memory Guard" of the SETUP menu is set to "On" (see page 59). To change the parameters, set it to "Off." 1 Turn on the video monitor connected to this unit. 2 Press jSETUP on the remote control. The SETUP menu appears on the monitor. 3 Press kCursor k / n to select "DSP Parameter" and press kENTER. The screen changes as follows. Sound field program Cursor MOVIE 1/2 . Sci-Fi SUR.;;;;PLII Movie 3D DSP;;;;;;;;;ON DSP Level;;;;;0dB P.Init.Dly;;;16ms P.Room Size;;;1.0 S.Init.DLY;;;;2ms Page number p [ [ ]/[ ]:Select Sound field parameters Set values 4 Press kCursor k / n to move "→" to the sound field program and press kCursor l / h to select the sound field program. 5 Press kCursor k / n to select the parameter that you want to change, and press kCursor l / h to change the parameter. An asterisk (*) appears on the left of the sound field parameter name displayed on the monitor when you change the parameter from its default setting. For details on functions and adjustable ranges of the sound field parameters, see "Sound field parameters" on this page. y • Repeat steps 4 and 5 to change other sound field program parameters. • A complete list of the parameters of some sound field programs may exceed one page. In this case, press kCursor k / n to scroll through pages. 6 To end the edit, press jSETUP. To initialize the parameters of the selected sound field program, kCursor n repeatedly to select "Initialize" and then press, kCursor h. When the confirmation screen appears on the monitor, press kCursor h to confirm the initialization or kCursor l to cancel it. Sound field parameters y • The default settings are marked with "*." CINEMA DSP basic parameters SUR. Choices: PLIIx Movie*/Neo:6 Cinema Selects a surround decoder to be used with a sound field program in the MOVIE category. PLIIx Movie: Selects the Dolby Pro Logic IIx (Movie) decoder. Neo:6 Cinema: Selects the Neo:6 (Cinema) decoder. Note • Surround decoders cannot be changed when used with the following MOVIE sound field programs. - Mono Movie - Sports - Action Game - Roleplaying Game 3D DSP Choices: On*/Off When CINEMA DSP 3D is enabled, sets whether to use sound field programs in CINEMA DSP 3D mode. Note • When the presence speakers are not used, the 3D DSP parameters are not displayed. DSP Level Adjustable range: -6 dB to 0 dB* to +3 dB Fine adjusts an effect level (level of the sound field effect to be added). You can adjust the level of the sound field effect while checking sound levels. Adjust "DSP Level" as follows. • The effect sound is too soft. • There is no difference in effects between the sound field programs. →Increase the effect level. • The sound is dull. • The sound field effect is added too much. →Reduce the effect level. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 49 En