Yamaha RXV765 Owner's Manual - Page 61

INTRODUCTION PREPARATION BASIC OPERATION ■ 2 Lipsync Adjusts delay between video output and audio output. HDMI Auto Choices: Off*/On Automatically adjusts output timing of audio and video signals when a monitor that supports an automatic lipsync function is connected to this unit. Off Select this when the connected monitor does not support the automatic lip-sync function or that function is not to be used. Set the correction time in "Manual Delay." On Select this when the connected monitor supports the automatic lip-sync function. Fine adjust the correction time in "Auto Delay." Auto Delay Adjustable range: 0* to 240ms (1 ms steps) Fine adjusts the correction time when "HDMI Auto" is set to "On." The actual correction time is displayed under in "Auto Delay" field and an offset time set by the user in "offset" field. Manual Delay Adjustable range: 0* to 240ms (1 ms steps) Manually fine adjusts the correction time. Select this when the connected monitor does not support the automatic lipsync function or you set "HDMI Auto" to "Off." Function Setup You can set various items for HDMI and display. y • The default settings are marked with "*." 1 HDMI You can set items for HDMI. ■ Control Choices: On/Off* Selects on or off of HDMI control functions when a component that supports the HDMI control functions is connected with this unit. When this is set to "On," signals input from the HDMI 1-4 jacks are output to a monitor component even when this unit is on standby. On Enables the HDMI control function. Off Disables the HDMI control function. Changing various settings of this unit (SETUP menu) ■ Standby Through Choices: On/Off* Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks to the HDMI OUT jack when this unit is on standby. When this parameter is set to "On" signals input from the HDMI 1-4 jacks can be output to a monitor component. This item is not displayed when "Control" is set to "On." On Outputs the HDMI signals to the HDMI OUT jack. Off Does not output the HDMI signals to the HDMI OUT jack. y • To enables pass-through output, any one of the input sources connected to the HDMI 1-4 jacks must be selected before switching to standby. • During pass-through output, the HDMI THROUGH indicator on the front panel display lights up. While the indicator lights up, it consumes 1 to 3W of power depending on a condition of an HDMI signal passing through this unit. ■ Audio Output Choices: Amp*/TV/Amp+TV Selects this unit or a component connected to this unit via the HDMI OUT jack of this unit for reproducing sound signals input from the HDMI 1-4 jacks. This item is not displayed when "Control" is set to "On." Amp TV Amp+TV Outputs HDMI sound signals form the speakers connected to this unit. Outputs HDMI sound signals from the speakers of a TV connected to this unit. Sound output from the speakers connected to this unit is muted. Outputs HDMI sound signals from the speakers connected to this unit and the speakers of a TV connected to this unit. Note • When "TV" or "Amp+TV" is selected, signal formats of audio and video signals output from this unit to the monitor vary depending on specifications of the monitor. ■ Resolution Choices: Through*/480p/720p/1080i/1080p Upscales the resolution of HDMI output that is converted from analog video input signals and output from the HDMI OUT jack. Notes • Resolution of the HDMI output converted from 720p or 1080i video signals cannot be upscaled. • When a video monitor is connected to this unit via the HDMI jack, this unit automatically detects a resolution that the monitor supports. An asterisk (*) appears on the left of the detected resolution. • If this unit cannot detect the resolution that the monitor supports, set "MON.CHK" in the ADVANCED SETUP menu to "SKIP" (see page 64) and try it again. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 57 En