Yamaha RXV765 Owner's Manual - Page 51

INTRODUCTION PREPARATION BASIC OPERATION ■ Decoder Mode Input source: HDMI1-4, AV1-4 Choices: Auto*/DTS Selects DTS digital audio signals for reproduction. Auto DTS Automatically selects audio input signals. Selects DTS signals only. Other input signals are not reproduced. ■ Extended Surround Input source: HDMI1-4, AV1-4 Choices: Auto*/PLIIx Movie/PLIIx Music/EX/ES/ Off Selects whether to reproduce multi-channel input signals in 6.1- or 7.1-channel when surround back speakers are used. Auto PLIIx Movie PLIIx Music EX/ES Off Automatically selects the most suitable decoder according to whether a flag for reproducing surround back channel is present, and reproduces the signals in 6.1- or 7.1channel. Always reproduces signals in 6.1- or 7.1channel using the PLIIx Movie decoder whether or not surround back channel signals are contained. You can select this parameter when two surround back speakers are connected. Always reproduces signals in 6.1- or 7.1channel using the PLIIx Music decoder whether or not surround back channel signals are contained. You can select this parameter when one or two surround back speakers are connected. Automatically selects the most suitable decoder for input signals whether or not the flag for reproducing surround back channel is present, and always reproduces signals in 6.1channel. Always reproduces signals in 5.1-channel when 5.1-channel sound is input, whether or not the flag for reproducing surround back channel is present. Setting the option menu for each input source (OPTION menu) ■ Signal Info Input source: HDMI1-4, AV1-4 Displays information on audio and video signals on the video monitor and front panel display. You can change items to be displayed using kCursor k / n. Signal Info parameters ■ Audio information Information Format Description Format of digital audio signals. Channel Sampling Bitrate The number of input signal channels (front/ surround/LFE). For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/ 0.1" is displayed. If a channel that cannot be expressed as the above, a total number of channels such as "5.1ch" may be displayed. The sampling frequency of digital input signal. The bit rate of input signal per second. Notes • "No Signal" is displayed when no signals are input and "---" is displayed when signals that this unit cannot recognize are input. • The bit rate may vary during playback. ■ Video information Information In Description Format and resolution of video input signal. Out Format and resolution of video output signal. Message Error messages about HDMI signals and HDMI components. See the following for details of the error messages. HDMI error message (appears only when an error has occurred) HDCP Error Device Over Out of Res. HDCP authentication failed. The number of HDMI components connected is over the limit. The connected monitor is not compatible with the video input signal. ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 47 En