Yamaha SH-01 SH-01 Owners Manual - Page 12
About the SmartMedia Memory Cards
View all Yamaha SH-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
About the SmartMediaTM Memory Cards I Using the SmartMedia Memory Cards When using the memory cards, please carefully follow the points listed below. G Memory Card Compatibility The SH-01 uses 3.3V (3V) SmartMedia memory cards. 5V memory cards can not be used. G Memory Card Capacity SmartMedia memory cards of any of the five following memory capacities can be used in the SH-01: 16MB/32MB/64MB/128MB. (→ page 38) G Inserting and Removing the Memory Cards Inserting the Memory Card Hold the card with the gold connectors facing down, then carefully insert the card all of the way into the memory card slot. * Be careful not to insert the card the wrong way around (upside-down, back-to-front). * To prevent possible damage or abnormal operation, make sure that dirt or other foreign objects do not get into the memory card slot. Removing the Memory Card After confirming that the SH-01 is not accessing* data in the memory card, grip the edge of the card and pull firmly outward. * The SH-01 accesses data from the memory card for operations such as recording, playback, save, load, format, delete, rename, etc. Also, the SH-01 will automatically access the memory card whenever a card is inserted while the power is switched on in order to determine the card's type. "DO NOT REMOVE CARD" appears in the display when a memory card access operation is in progress. * There are some instances where the SH-01 can not recognize the memory card when the card is removed and reinserted. In such an instance, turn the power OFF and ON again (reset). Never remove the memory card or switch the SH-01's power off while any memory card-access operation is in progress. Doing so may damage the card itself and/or corrupt data on the card as well as in the SH-01 itself. Formatting the Memory Card Not all memory cards can be used as is. Before any memory card is used with the SH-01, it should be formatted (default) by the SH-01. (→ page 34) All data in the card is erased when the card is formatted, so make sure that the card you want to format does not contain any important data. * Memory cards that are formatted by the SH-01 might not work in any other devices. 12