Yamaha SH-01 SH-01 Owners Manual - Page 25
Displaying File Information, Record the Vocal Part Mix Recording
View all Yamaha SH-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the SH-01 G Record the Vocal Part (Mix Recording) In this step, we will overdub a vocal part onto the already recorded guitar part. But before you record the vocal part, why don't you try rehearsing along with the guitar part. 1 First switch the SH-01's power off, then connect a vocal microphone (dynamic type) to the INST. jack. Next, set the INTERNAL MIC switch to its "OFF" position. (→ page 14) 2 Switch the power ON. * While the SH-01 is starting up, "YAMAHA SOUND SKETCHER" will appear in the display. Button operation is not possible at this time. The SH-01 selects the most recently recorded file. 02/02 SONGå002 03:12 Displaying File Information If none of the buttons have been pressed after the SH-01's power is switched ON, the main display (normal display) shown below will appear. If you press the [DISPLAY/MENU] button you can scroll through the different displays, as shown below, to confirm the original file's settings for level, file information, and effect settings before you start mix recording.8) [Main Display] File number/Total number of files in the card 02/02 SONGå002 ´ 03:12 UNDO´ mark (displayed only when the UNDO operation is available) [Level Display] Record level (with peak hold) LEVEL SONGå002 03:12 [File Information Display] MP3 192k STEREO SONGå002 03:12 File type Bit rate Stereo/Monaural [Effect Display] TYP:INTERNAL MIC SONGå002 03:12 Name of the effect type currently selected On the bottom half of the display, the file name and total time of the selected file is shown in all displays. 25