Yamaha SH-01 SH-01 Owners Manual - Page 14

About the Connections • Before making any connections, make sure that the power on all devices is switched OFF. • After the devices have been connected, turn down the SH-01's VOLUME as well as the volume of the audio devices (external sound system, etc.) connected to the SH01. Next, switch on the power of the devices in the following order: SH-01→sound system. Reverse this order when you are ready to switch the power OFF. Instrument/Microphone Connections G Connecting an Instrument or Vocal Microphone You can connect an electric guitar, electric/acoustic guitar, a dynamic type vocal microphone, etc., to the INST. jack (standard monaural) located on the unit's rear panel. Use the GAIN switch (HIGH/LOW) to adjust the input gain to match the output level of the instrument or microphone. The INPUT volume control on the top panel is used to adjust the input volume level of the instrument/microphone. * If the internal microphone is not going to be used, switch the INTERNAL MIC switch to its "OFF" position. Use the GAIN switch to optimize the SH-01's input gain with the output level of the instrument or microphone. • How to set the GAIN Switch GAIN Switch INST. jack being used Using the built-in mic HIGH Vocal Mic Home recording LOW Guitar Recording loud volumes in a studio, etc. G Connecting a Line Level Instrument Line level instruments such as a keyboard, synthesizer, electronic drum set, etc., can be connected to the miniature stereo LINE IN jack located on the side panel of the SH-01. The INPUT volume control on the top panel is used to adjust the input level of the instrument. * If the internal microphone is not going to be used, switch the INTERNAL MIC switch to the "OFF" position. 14