Yamaha SH-01 SH-01 Owners Manual - Page 47

Troubleshooting If, while using the SH-01, you experience problems such as "no sound", "abnormal recording", etc., please refer to the list below before deciding that the unit is malfunctioning. If, after referring to the list below, you are still experiencing problems, contact the Yamaha dealer from whom you purchased the SH-01. Problem Possible Causes No power • Is the power adaptor properly connected? (→ page 11) • Are the batteries properly installed? (→ page 11) • Is battery power low? Nothing appears on the display • Is the contrast properly set? (→ page 39) No sound • Are the VOLUME, INPUT volume, and PLAY volume turned up? • Is a pair of headphones or external speakers properly connected to the SH-01? (→ page 15) • When a plug is inserted into the LINE OUT/PHONES jack, the SH-01's built-in speakers do not produce sound. • When the INTERNAL MIC switch is set to its "ON" position, the built-in speakers do not produce sound. The sound is distorted • Is the input level too high? → If the INST. jack is being used for sound input, set the "GAIN" switch to its "LOW" position. → Reduce the output level on the instrument, CD player, etc. connected to the SH-01. → Reduce the INPUT volume level. • Is a distortion type effect such as "DRIVE", "DISTORTION", etc., selected? (→ page 20) The INPUT volume control is inactive, the Pan setting is inactive. • When a "MASTERING" effect is selected, the INPUT volume and PAN setting are both ignored. The SH-01 did not record anything • Was the power switched OFF, or was the memory card removed from the memory card slot during mix recording? UNDO is not available • The UNDO function is unavailable during format (→ page 34) and all file delete (→ page 33) operations. • When the power is switched OFF, or when the memory card is removed, UNDO is ignored even if it is available. • If the device is disconnected from the computer, the UNDO operation is ignored. The file has disappeared • Files can only be transferred, not copied, between the SH-01 and the computer. After the file is transferred from one device to the other, data for the original file is deleted. Available recording time does not increase although files have been deleted. • When the file delete operation (→ page 32) is carried out with the [UNDO/DELETE] button, a file is saved for the UNDO command therefore available recording time will not change. After carrying out the file delete operation, switch the SH-01's power OFF to erase the file being saved for the UNDO command. When the power is switched ON, available recording time should show an increase. 47