Yamaha SH-01 SH-01 Owners Manual - Page 20
Try Out the Mix Recording Function
![]() |
View all Yamaha SH-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Using the SH-01 Try Out the Mix Recording Function The Mix Recording function can be used to overdub a vocal part after recording the guitar part. * Before you start recording your guitar make sure its in tune. The SH-01 is equipped with a tuner that is described on page 24. G Recording a Guitar (Make a New Recording) 1 Connect your electric or electric/acoustic guitar to the SH-01's INST. jack. If you playing an acoustic guitar, you can either use the built-in microphones or connect a dynamic type microphone to the INST. jack to record audio. If the built-in microphones will not be used, switch INTERNAL MIC switch to its "OFF" position. Also, connect a pair of headphones to the LINE OUT/PHONES jack for monitoring. (→ page 15) OFF 2 Using the step 2 of the same procedures described on page 17 and 18 • Play the guitar, and adjust the input level while monitoring through a pair of head- phones. At this point, preparation for recording the guitar is complete, but let's try adding some of the SH-01's on-board effects to the guitar's sound. 3 Press the [EFFECT] button to display the effect settings. The Effect Category name will appear on the top half of the display and the Effect Type will appear on the bottom half of the display. CAT:BASIC TYP:INTERNAL MIC Effect Category Name Effect Type 20
![](/manual_guide/products/yamaha-sh01-sh01-owners-manual-8a9af68/20.png)