ZyXEL P-660RU-T3 v2 User Guide - Page 42
Table 6, Wizard Setup, P-660RU-T v2 User's Guide
View all ZyXEL P-660RU-T3 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 3 Wizard Setup Table 5 Internet Connection with PPPoE (continued) LABEL DESCRIPTION Connection Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default setting selects Connection on Demand with 0 as the idle time-out, which means the Internet session will not timeout. Select Nailed-Up Connection when you want your connection up all the time. The ZyXEL Device will try to bring up the connection automatically if it is disconnected. Network Address Translation Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT chapter for more details. Back Click Back to go back to the first wizard screen. Next Click Next to continue to the next wizard screen. Figure 8 Internet Connection with RFC 1483 The following table describes the labels in this screen. Table 6 Internet Connection with RFC 1483 LABEL DESCRIPTION IP Address This field is available if you select Routing in the Mode field. Type your ISP assigned IP address in this field. Network Address Select None, SUA Only or Full Feature from the drop-down list box. Refer to Translation Chapter 12 on page 91 for more details. Back Click Back to go back to the first wizard screen. Next Click Next to continue to the next wizard screen. 42 P-660RU-T v2 User's Guide