1995 Chevrolet Blazer Owner's Manual - Page 132

Use GM accessory racks that are compatible with your luggage carrier for transporting sportsequipment. These are available through your dealer. GM Remove the center rubber stripsin the cross rails and attach the GM accessory rack to the nut plates provided through the center slots (four per cross rail). The tap plates can moved to accommodate various positioning sliding be by them inside the cross rail to the desired locations before mounting the accessory rack. You can adjust the cross rails to handle different size loads. loosen the Just slider knobs at each end of the cross rail and move them where want you them. Make sure both sides the cross rail are of even, then tighten the slider knobs. Be sure thecargo is properlyloaded. Carrying small, heavy loads on the roof is not recommended. 0 Tie the load to the moveable tie down, (two per each side of the side rails). Use the cross rails only keep the load from sliding. to If you need to carry longitems, move the cross railsas far apart as possible. Tie the load to the moveable downs providedin the side tie rails. Also tie the load to the bumpers. Do not tie the load tightly that so the cross rails or side rails are damaged. NOTICE: Loading cargo that weighs more than 200 pounds (91 kg) on the luggage carrier may damage your vehicle. When youcarry large things, never let them hang over therear or the sides of your vehicle. Load yourcargo so that itrests onthe slats and does not scratch or damage the vehicle. Put thecargo against the side rails and fasten it securely to the luggage carrier. Put the main weight as forward as you can. far 2-80