1995 Chevrolet Blazer Owner's Manual - Page 74

FIRST GEAR (1) - This position gives you even more power (but lower fuel economy) than SECOND GEAR (2). can use it on very You steep hills,or in deep snow or mud. If the selector lever put in FIRST is GEAR (1) while the vehicleis moving forward, the transmission won't shift into FIRST GEAR (1) until the vehicle is going slowly enough. NOTICE: If your rear wheels can't rotate, don't try to drive. This might happen if you were stuck in very deep sand or mud were up or against a solid object. You could damage your transmission. Also, if you stop when going uphill, don't hold your vehicle there with only the accelerator pedal. This could overheat and damage the transmission.Use your brakes or shift into PARK (P) hold to your vehicle in position on a hill. Five-Speed Manual Transmission . I pattern. Here's how to operate your transmission: This is your shift FIRST GEAR (1) -Press the clutch pedal and shift into FlRST GEAR (1). Then, slowly let up on the clutch pedal as you press the accelerator pedal. You can shift into FIRST GEAR (1) when you're going less than 20 mph (32 km/h). If you've come to a complete stop and it's hardto shift into FIRST GEAR (1)' put the shift lever in NEUTRAL, (N) and let up on the clutch. Press the clutch pedal back down. Thenshift into FIRST GEAR (1). 2-22