1995 Chevrolet Blazer Owner's Manual - Page 257

How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use.See "Recommended Fluids and Lubricants" in the Index. Add fluid only after checking the transmission fluid HOT. (A COLD check is used only as a reference.) If the fluid level is low, add only enoughof the proper fluid to bring the level up to the area for a hot check.It doesn't HOT take much fluid, generally less than a int. Don 't overfill. We recommend 8 you use only fluid labeled DEXRON -111, because fluid withthat label is made especially for your automatic transmission. Damage caused fluid by other than DEXRON@-I11is not coveredby your new vehicle warranty. After adding fluid, recheck the fluid level as described under "How to Check." 0 When the correct fluid level is obtained, push the dipstick back in all the way; then flip the handle down to lock the dipstick in place. Manual Transmission Fluid When to Check A good time to haveit checked is when the engine oil is changed. However, the fluid in your manual transmission doesn't require changing. How to Check Because this operation can a little difficult, you may choose to have this be done at your GM dealershipService Department. If you do it yourself, be sure to follow all the instructions here, you could or get a false reading. I NOTICE: Too much or too little fluid can damage your transmission. Too much can mean that some the fluid could come out and fall on of hot engine parts or exhaust system parts, starting a fire. Be sure to get an accurate reading if you check your transmission fluid. Check the fluid level only when your engine is off, the vehicle is parked on a level place and the transmission cool enoughfor you to rest your fingers is on the transmission case. 6-17