1995 Chevrolet Blazer Owner's Manual - Page 290

Using Foam-Type Cleaneron Fabric 0 0 Vacuum and brush the area to remove any loose dirt. Always cleana whole trim panelor section. Mask surrounding trim along stitch or welt lines. Mix Multi-Purpose Powdered Cleaner following the directionson the container label. Use suds only and apply with clean sponge. a Don't saturate the material. Don't rub it roughly. As soon as you've cleaned the section, use a sponge toremove the suds. Rinse the section witha clean, wet sponge. Wipe off what's left witha slightly damp paper towel or cloth. Then dry it immediately with a blow dryer or a heat lamp. 0 0 0 0 0 . 0 NOTICE: Be careful. A blow dryer may scorch the fabric. 0 Wipe with a clean cloth. Using Solvent-Type Cleaner on Fabric First, see if you have to use solvent-type cleaner at all. Some spots and stains will cleanoff better withjust water and mildsoap. If you need to use a solvent: 0 Gently scrapeexcess soil from the trim material witha clean, dull knife or scraper. Use very little cleaner, light pressure and clean cloths (preferably cheesecloth). Cleaning should at the outsideof the start stain, "feathering" toward the center. Keep changing clean section a to of thecloth. When you cleana stain from fabric, immediately drythe area with a blow dryer to help prevent a cleaning ring. (See the previous NOTICE.) 0 6-50