2010 Chrysler Town & Country Owner Manual - Page 155
2010 Chrysler Town & Country Manual
Page 155 highlights
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Memory Positions and Linking RKE Transmitter to Memory 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). NOTE: Each time the SET (S) button and a numbered 6. Turn the ignition switch to the OFF position and button (1 or 2) is pressed, you erase the memory settings remove the key. for that button and store a new one. 7. Press and release the SET (S) button located on the 1. Insert the ignition key and turn the ignition switch to driver's door. the ON position. 8. Within five seconds, press and release MEMORY 2. Press the driver door MEMORY button number 1 if button 1 or 2 on the driver's door. The next step must be you are setting the memory for driver 1, or button performed within 10 seconds if you desire to also use a number 2 if you are setting the memory for driver 2. The RKE transmitter to recall memory positions. system will recall any stored settings. Wait for the system 9. Press and release the LOCK button on one of the RKE to complete the memory recall before continuing to transmitters. Step 3. 10. Insert the ignition key and turn the ignition switch to 3. Adjust the driver's seat, recliner, and driver's sidethe ON position. view mirror to the desired positions. 4. Adjust the brake and accelerator pedals to the desired positions.