2010 Chrysler Town & Country Owner Manual - Page 24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 2. Press the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press the PANIC button while still holding the LOCK button. 3. Release both buttons at the same time. Using the Panic Alarm To turn the Panic Alarm feature on or off, press and hold the PANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lights will flash, the horn will pulse on and off, and the interior lights will turn on. 2 4. Test the feature while outside of the vehicle by pressThe Panic Alarm will stay on for three minutes unless ing the LOCK button on the RKE transmitter with the you turn it off by pressing the PANIC button a second ignition switch in the LOCK position and the Key Fob time, or you turn the ignition switch to the ON position. removed. NOTE: When you turn off the Panic Alarm by pressing 5. Repeat these steps if you want to return this feature to the PANIC button a second time, you may have to be its previous setting. closer to the vehicle due to the Radio Frequency (RF) NOTE: Pressing the LOCK button on the RKE transmit- noises of the system. ter while you are in the vehicle will activate the Vehicle Power Open/Close Power Liftgate - If Equipped Security Alarm. Opening a door with the Vehicle Security Press the LIFTGATE button twice on the RKE transmitter Alarm activated will cause the alarm to sound. Press the within five seconds to Open/Close the Power Liftgate. If UNLOCK button to deactivate the Vehicle Security the button is pushed while the liftgate is being power Alarm. closed, the liftgate will reverse to the full open position.